Page Comparison

...

Expand

title	Attribute Schema:

Dam Wall - Major
A polygon feature class displaying the extent of major dam walls within the State of Queensland.
Column Name	Nulls	Format	Size	Description	Constraints
FEATURE_TYPE	No	Text	100	Unique feature type that identifies the type of feature. Options: Dam Wall Major
DAM_TYPE	No	Text	20	The type of dam. Options: Ana-Branch Weir Balancing Storage Barrage Dam Off-Stream Storage Saddle Dam Weir	dm_dam_type
NAME	Yes	Text	100	The name of the feature (if available)
ALTERNATE_NAME	Yes	Text	100	An alternate name of the feature if available from the Queensland Place Names Database, otherwise left blank
QLD_PNDB_ID	Yes	Long		Queensland Place Names Database unique identifier
ATTRIBUTE_SOURCE	No	Text	100	If the feature is named, the attribute_source is the source imagery, map, or data from which the features name has been obtained. If the feature is not named, the attribute_source is the source imagery, map, or data used to define what the feature type is.
ATTRIBUTE_DATE	No	Date		Date of the source imagery, map, or data used for attributing the feature.
ADDITIONAL_NAMES	Yes	Text	100	The feature may be commonly known by other names or have different spelling. Multiple additional names can be shown and separated by a comma.
ADD_NAMES_SOURCE	Yes	Text	100	The source map or data that the additional names were obtained. Multiple sources can be shown, separated by a comma. If multiple sources are shown, the written sequence will be the same as the written sequence of the names themselves.
FEATURE_SOURCE	No	Text	100	The source imagery, map, or data that the spatial location and shape of the of the feature was obtained from.
FEATURE_DATE	No	Date		Date of the source imagery, map, or data that the spatial location and shape of the feature was obtained from.
PFI	No	Text	15	A Persistent Feature Identifier (PFI) is generated for each feature at the point of creation in the database. The value of the PFI will stay with the feature through all changes to the feature (both spatial and non-spatial) until the feature is retired. (See Persistent and Unique Feature Identifiers)
UFI	No	Text	15	A Unique Feature Identifier (UFI) is generated for each new feature at the point of creation in the database (at this point the PFI and UFI will be the same). The value of the UFI will stay with the feature through all changes to the feature (both spatial and non-spatial) unless the feature is split into multiple other parts. If the feature is split, the separate parts will retain the original PFI but new UFI’s will be generated for the split parts. (See Persistent and Unique Feature Identifiers)
CREATED_DATE*	No	Date		The date the feature was originally captured and first loaded to the database *internal use only
LAST_EDITED_DATE*	No	Date		Date of the last editing or revision to the feature *internal use only
ASS_WATERCOURSE	Yes	Text	100	The name of the watercourse the dam is located on.
AMTD	Yes	Double		(Adopted Middle Thread Distance) Defines the distance the feature is along from the start of a watercourse
DAM_OWNER	Yes	Text	100	The entity undertaking the day-to-day operations of the infrastructure. If the owner is non-government or quasi-government, the owner will be shown as “Private”
REPORTABLE_DAM_ID	Yes	Long		Queensland Reportable Dams unique identifier
WTR_SUPPLY_SCHEME	Yes	Text	100	The bulk water supply scheme or town water system associated with the bulk water storage infrastructure
CONSTRUCTED_DATE	Yes	Date		Date of construction of the dam if available
FULL_SUPPLY_LEVEL (M)	Yes	Double		The normal maximum operating water levelof a water storage when not affected by floods. The elevation of the full supply level is measured in metres on the Australian Height Datum (AHD). If not on AHD, the datum will be recorded in the “Additional Information” field
DIMENSION_M2	No	Double		The area of the feature measured in square metres GDA2020
UPPER_SCALE	No	Long		The upper scale for which the feature should be considered suitable for digital display	dm_upper_scale
TEXT_NOTE	Yes	Text	50	For mapping purposes. Additional annotation that can be shown on a map. If the feature has no name. In this field, type in lower case the dam type: e.g., weir

...

Expand

title	Attribute Schema:

Dam Wall - Minor
A polyline feature class displaying the location of minor dam walls within the State of Queensland.
Column Name	Nulls	Format	Size	Description	Constraints
FEATURE_TYPE	No	Text	100	Unique feature type that identifies the type of feature. Options: Dam Wall Minor
NAME	Yes	Text	100	The name of the feature (if available)
ATTRIBUTE_SOURCE	No	Text	100	If the feature is named, the attribute_source is the source imagery, map, or data from which the features name has been obtained. If the feature is not named, the attribute_source is the source imagery, map, or data used to define what the feature type is.
ATTRIBUTE_DATE	No	Date		Date of the source imagery, map, or data used for attributing the feature.
ADDITIONAL_NAMES	Yes	Text	100	The feature may be commonly known by other names or have different spelling. Multiple additional names can be shown and separated by a comma.
ADD_NAMES_SOURCE	Yes	Text	100	The source map or data that the additional names were obtained. Multiple sources can be shown, separated by a comma. If multiple sources are shown, the written sequence will be the same as the written sequence of the names themselves.
FEATURE_SOURCE	No	Text	100	The source imagery, map, or data that the spatial location and shape of the of the feature was obtained from.
FEATURE_DATE	No	Date		Date of the source imagery, map, or data that the spatial location and shape of the feature was obtained from.
PFI	No	Text	15	A Persistent Feature Identifier (PFI) is generated for each feature at the point of creation in the database. The value of the PFI will stay with the feature through all changes to the feature (both spatial and non-spatial) until the feature is retired. (See Persistent and Unique Feature Identifiers)
UFI	No	Text	15	A Unique Feature Identifier (UFI) is generated for each new feature at the point of creation in the database (at this point the PFI and UFI will be the same). The value of the UFI will stay with the feature through all changes to the feature (both spatial and non-spatial) unless the feature is split into multiple other parts. If the feature is split, the separate parts will retain the original PFI but new UFI’s will be generated for the split parts. (See Persistent and Unique Feature Identifiers)
CREATED_DATE*	No	Date		The date the feature was originally captured and first loaded to the database *internal use only
LAST_EDITED_DATE*	No	Date		Date of the last editing or revision to the feature *internal use only
DIMENSION_M	No	Double		The length of the feature measured in metres GDA2020
UPPER_SCALE	No	Long		The upper scale for which the feature should be considered suitable for digital display	dm_upper_scale
TEXT_NOTE	Yes	Text	50	For mapping purposes. Additional annotation that can be shown on a map.
ADD_INFORMATION	Yes	Text	255	A comment field (additional information)

...

Expand

title	Attribute Schema:

Emergency Services Points
A point feature class displaying the location of named emergency services facilities. An automatically derived subset of data from Building points and areas
Column Name	Nulls	Format	Size	Description	Constraints
FEATURE_TYPE	No	Text	50	Unique feature type that identifies the type of feature. Options: Ambulance Station Aviation Medical and Rescue Facility Emergency Control Centre Fire Station Metro Fire Station Rural Marine Rescue or Coast Guard Station Police Beat Shopfront Police Station State Emergency Services Facility Water Police Facility Other Emergency Services Facility	dm_emergency_ services
NAME	No	Text	100	The name of the feature
ATTRIBUTE_SOURCE	No	Text	100	The source map, or data where the name of the feature was obtained.
ATTRIBUTE_DATE	No	Date		Date of the source map, or data where the name of the feature was obtained from.
ADDITIONAL_NAMES	Yes	Text	100	The feature may be commonly known by other names or have different spelling. Multiple additional names can be shown and separated by a comma.
ADD_NAMES_SOURCE	Yes	Text	100	The source map or data that the additional names were obtained. Multiple sources can be shown, separated by a comma. If multiple sources are shown, the written sequence will be the same as the written sequence of the names themselves.
FEATURE_SOURCE	No	Text	100	The source imagery, map, or data that the spatial location of the feature was obtained from.
FEATURE_DATE	No	Date		Date of the source imagery, map, or data that the spatial location of the feature was obtained from.
OPERATIONAL_STATUS	No	Text	30	The operation status of the facility. Options: Operational Other	dm_building_ status
PFI	No	Text	15	A Persistent Feature Identifier (PFI) is generated for each feature at the point of creation in the database. The value of the PFI will stay with the feature through all changes to the feature (both spatial and non-spatial) until the feature is retired. (See Persistent and Unique Feature Identifiers)
UFI	No	Text	15	A Unique Feature Identifier (UFI) is generated for each new feature at the point of creation in the database (at this point the PFI and UFI will be the same). The value of the UFI will stay with the feature through all changes to the feature (both spatial and non-spatial) unless the feature is split into multiple other parts. If the feature is split, the separate parts will retain the original PFI but new UFI’s will be generated for the split parts. (See Persistent and Unique Feature Identifiers)
CREATED_DATE*	No	Date		The date the feature was originally captured and first loaded to the database *internal use only
LAST_EDITED_DATE*	No	Date		Date of the last editing or revision to the feature *internal use only
UPPER_SCALE	No	Long		The upper scale for which the feature should be considered suitable for digital display	dm_upper_scale
TEXT_NOTE	Yes	Text	50	For mapping purposes. Additional annotation that can be shown on a map.
ADD_INFORMATION	Yes	Text	255	A comment field (additional information)

...

Expand

title	Attribute Schema:

Marine Infrastructure Areas
A polygon feature class displaying the extent of infrastructure associated with the marine environment of Queensland's Coastline and inland waters.
Column Name	Nulls	Format	Size	Description	Constraints
FEATURE_TYPE	No	Text	50	Unique feature type that identifies the type of feature. Options: Marina Wharf Area Other Marine Infrastructure Area	dm_marine_ infra_area
NAME	Yes	Text	100	The name of the feature (if available)
ALTERNATE_NAME	Yes	Text	100	An alternate name of the feature if available from the Queensland Place Names Database, otherwise left blank
QLD_PNDB_ID	Yes	Long		Queensland Place Names Database unique identifier
ATTRIBUTE_SOURCE	No	Text	100	If the feature is named, the attribute_source is the source imagery, map, or data from which the features name has been obtained. If the feature is not named, the attribute_source is the source imagery, map, or data used to define what the feature type is.
ATTRIBUTE_DATE	No	Date		Date of the source imagery, map, or data used for attributing the feature.
ADDITIONAL_NAMES	Yes	Text	100	The feature may be commonly known by other names or have different spelling. Multiple additional names can be shown and separated by a comma.
ADD_NAMES_SOURCE	Yes	Text	100	The source map or data that the additional names were obtained. Multiple sources can be shown, separated by a comma. If multiple sources are shown, the written sequence will be the same as the written sequence of the names themselves.
FEATURE_SOURCE	No	Text	100	The source imagery, map, or data that the spatial location and shape of the of the feature was obtained from.
OPERATIONAL_STATUS	No	Text	30	The operation status of the facility. Options: Abandoned Operational Non Operational Proposed Under Construction	dm_infra_status
PFI	No	Text	15	A Persistent Feature Identifier (PFI) is generated for each feature at the point of creation in the database. The value of the PFI will stay with the feature through all changes to the feature (both spatial and non-spatial) until the feature is retired. (See Persistent and Unique Feature Identifiers)
UFI	No	Text	15	A Unique Feature Identifier (UFI) is generated for each new feature at the point of creation in the database (at this point the PFI and UFI will be the same). The value of the UFI will stay with the feature through all changes to the feature (both spatial and non-spatial) unless the feature is split into multiple other parts. If the feature is split, the separate parts will retain the original PFI but new UFI’s will be generated for the split parts. (See Persistent and Unique Feature Identifiers)
CREATED_DATE*	No	Date		The date the feature was originally captured and first loaded to the database *internal use only
LAST_EDITED_DATE*	No	Date		Date of the last editing or revision to the feature *internal use only
DIMENSION_M2	No	Double		The area of the feature measured in square metres GDA2020
UPPER_SCALE	No	Long		The upper scale for which the feature should be considered suitable for digital display	dm_upper_scale
TEXT_NOTE	Yes	Text	50	For mapping purposes. Additional annotation that can be shown on a map. If the feature is classified as a marina and has no name. In this field, type in lowercase the following: e.g., marina If the feature is classified as a wharf area. In this field, type in lower case the following: e.g., wharf
ADD_INFORMATION	Yes	Text	255	A comment field (additional information)

...

Expand

title	Attribute Schema:

Marine Infrastructure Lines
A polyline feature class displaying the location of infrastructure associated with the marine environment of Queensland's Coastline and inland waters.
Column Name	Nulls	Format	Size	Description	Constraints
FEATURE_TYPE	No	Text	50	Unique feature type that identifies the type of feature. Options: Boat Ramp Breakwater Dry Dock Groyne Jetty Sea Wall Wharf Line Other Marine Infrastructure Line	dm_marine_ infra_line
NAME	Yes	Text	100	The name of the feature (if available) For named jetties, the suffix of 'Pier' or 'Jetty will be included in the name e.g., Shorncliffe Pier
ALTERNATE_NAME	Yes	Text	100	An alternate name of the feature if available from the Queensland Place Names Database, otherwise left blank
QLD_PNDB_ID	Yes	Long		Queensland Place Names Database unique identifier
ATTRIBUTE_SOURCE	No	Text	100	If the feature is named, the attribute_source is the source imagery, map, or data from which the features name has been obtained. If the feature is not named, the attribute_source is the source imagery, map, or data used to define what the feature type is.
ATTRIBUTE_DATE	No	Date		Date of the source imagery, map, or data used for attributing the feature.
ADDITIONAL_NAMES	Yes	Text	100	The feature may be commonly known by other names or have different spelling. Multiple additional names can be shown and separated by a comma.
ADD_NAMES_SOURCE	Yes	Text	100	The source map or data that the additional names were obtained. Multiple sources can be shown, separated by a comma. If multiple sources are shown, the written sequence will be the same as the written sequence of the names themselves.
FEATURE_SOURCE	No	Text	100	The source imagery, map, or data that the spatial location and shape of the of the feature was obtained from.
FEATURE_DATE	No	Date		Date of the source imagery, map, or data that the spatial location and shape of the feature was obtained from.
OPERATIONAL_STATUS	No	Text	30	The operation status of the facility. Options: Abandoned Operational Non Operational Proposed Under Construction	dm_infra_status
PFI	No	Text	15	A Persistent Feature Identifier (PFI) is generated for each feature at the point of creation in the database. The value of the PFI will stay with the feature through all changes to the feature (both spatial and non-spatial) until the feature is retired. (See Persistent and Unique Feature Identifiers)
UFI	No	Text	15	A Unique Feature Identifier (UFI) is generated for each new feature at the point of creation in the database (at this point the PFI and UFI will be the same). The value of the UFI will stay with the feature through all changes to the feature (both spatial and non-spatial) unless the feature is split into multiple other parts. If the feature is split, the separate parts will retain the original PFI but new UFI’s will be generated for the split parts. (See Persistent and Unique Feature Identifiers)
CREATED_DATE*	No	Date		The date the feature was originally captured and first loaded to the database *internal use only
LAST_EDITED_DATE*	No	Date		Date of the last editing or revision to the feature *internal use only
DIMENSION_M	No	Double		The length of the feature measured in metres GDA2020
UPPER_SCALE	No	Long		The upper scale for which the feature should be considered suitable for digital display	dm_upper_scale
TEXT_NOTE	Yes	Text	50	For mapping purposes. Additional annotation that can be shown on a map. If the feature has no name. In this field, type in lower case the type of feature: e.g., groyne If the feature has no name and is classified as a “Wharf Line”. In this field, type in lower case the following: wharf
ADD_INFORMATION	Yes	Text	255	A comment field (additional information)

...

Expand

title	Attribute Schema:

Marine Infrastructure Points
A point feature class displaying the location of infrastructure associated with the marine environment of Queensland's Coastline and inland waters.
Column Name	Nulls	Format	Size	Description	Constraints
FEATURE_TYPE	No	Text	50	Unique feature type that identifies the type of feature. Options: Lighthouse Lock Other Marine Infrastructure Point	dm_marine_ infra_point
NAME	Yes	Text	100	The name of the feature (if available)
ALTERNATE_NAME	Yes	Text	100	An alternate name of the feature if available from the Queensland Place Names Database, otherwise left blank
QLD_PNDB_ID	Yes	Long		Queensland Place Names Database unique identifier
ATTRIBUTE_SOURCE	No	Text	100	If the feature is named, the attribute_source is the source imagery, map or data from which the features name has been obtained. If the feature is not named, the attribute_source is the source imagery, map, or data used to define what the feature type is.
ATTRIBUTE_DATE	No	Date		Date of the source imagery, map, or data used for attributing the feature.
ADDITIONAL_NAMES	Yes	Text	100	The feature may be commonly known by other names or have different spelling. Multiple additional names can be shown and separated by a comma.
ADD_NAMES_SOURCE	Yes	Text	100	The source map or data that the additional names were obtained. Multiple sources can be shown, separated by a comma. If multiple sources are shown, the written sequence will be the same as the written sequence of the names themselves.
FEATURE_SOURCE	No	Text	100	The source imagery, map, or data that the spatial location of the feature was obtained from.
FEATURE_DATE	No	Date		Date of the feature source information that the location of the feature was obtained from.
OPERATIONAL_STATUS	No	Text	30	The operation status of the facility. Options: Abandoned Operational Non Operational Proposed Under Construction	dm_infra_status
PFI	No	Text	15	A Persistent Feature Identifier (PFI) is generated for each feature at the point of creation in the database. The value of the PFI will stay with the feature through all changes to the feature (both spatial and non-spatial) until the feature is retired. (See Persistent and Unique Feature Identifiers)
UFI	No	Text	15	A Unique Feature Identifier (UFI) is generated for each new feature at the point of creation in the database (at this point the PFI and UFI will be the same). The value of the UFI will stay with the feature through all changes to the feature (both spatial and non-spatial) unless the feature is split into multiple other parts. If the feature is split, the separate parts will retain the original PFI but new UFI’s will be generated for the split parts. (See Persistent and Unique Feature Identifiers)
CREATED_DATE*	No	Date		The date the feature was originally captured and first loaded to the database *internal use only
LAST_EDITED_DATE*	No	Date		Date of the last editing or revision to the feature *internal use only
UPPER_SCALE	No	Long		The upper scale for which the feature should be considered suitable for digital display	dm_upper_scale
TEXT_NOTE	Yes	Text	50	For mapping purposes. Additional annotation that can be shown on a map.
ADD_INFORMATION	Yes	Text	255	A comment field (additional information)

...

Expand

title	Attribute Schema:

Recreational Areas
A polygon feature class displaying the extent of land set aside for recreational, relaxation or amusement purposes.
Column Name	Nulls	Format	Size	Description	Constraints
FEATURE_TYPE	No	Text	50	Unique feature type that identifies the type of feature. Options: Aquatic Centre Botanic Gardens Civic Square Golf Course Park Racecourse Rifle Range Show Ground Sporting Complex Theme Park Zoo Other Recreational Area	dm_rec_area
NAME	Yes	Text	100	The name of the feature (if available)
ALTERNATE_NAME	Yes	Text	100	An alternate name of the feature if available from the Queensland Place Names Database, otherwise left blank
QLD_PNDB_ID	Yes	Long		Queensland Place Names Database unique identifier
ATTRIBUTE_SOURCE	No	Text	100	If the feature is named, the attribute_source is the source imagery, map, or data from which the features name has been obtained. If the feature is not named, the attribute_source is the source imagery, map, or data used to define what the feature type is.
ATTRIBUTE_DATE	No	Date		Date of the source imagery, map, or data used for attributing the feature.
ADDITIONAL_NAMES	Yes	Text	100	The feature may be commonly known by other names or have different spelling. Multiple additional names can be shown and separated by a comma.
ADD_NAMES_SOURCE	Yes	Text	100	The source map or data that the additional names were obtained. Multiple sources can be shown, separated by a comma. If multiple sources are shown, the written sequence will be the same as the written sequence of the names themselves.
FEATURE_SOURCE	No	Text	100	The source imagery, map, or data that the spatial location and shape of the of the feature was obtained from.
FEATURE_DATE	No	Date		Date of the source imagery, map, or data that the spatial location and shape of the feature was obtained from.
PFI	No	Text	15	A Persistent Feature Identifier (PFI) is generated for each feature at the point of creation in the database. The value of the PFI will stay with the feature through all changes to the feature (both spatial and non-spatial) until the feature is retired. (See Persistent and Unique Feature Identifiers)
UFI	No	Text	15	A Unique Feature Identifier (UFI) is generated for each new feature at the point of creation in the database (at this point the PFI and UFI will be the same). The value of the UFI will stay with the feature through all changes to the feature (both spatial and non-spatial) unless the feature is split into multiple other parts. If the feature is split, the separate parts will retain the original PFI but new UFI’s will be generated for the split parts. (See Persistent and Unique Feature Identifiers)
CREATED_DATE*	No	Date		The date the feature was originally captured and first loaded to the database *internal use only
LAST_EDITED_DATE*	No	Date		Date of the last editing or revision to the feature *internal use only
DIMENSION_M2	No	Double		The area of the feature measured in square metres GDA2020
UPPER_SCALE	No	Long		The upper scale for which the feature should be considered suitable for digital display	dm_upper_scale
TEXT_NOTE	Yes	Text	50	For mapping purposes. Additional annotation that can be shown on a map. If the feature type is an aquatic centre, golf course, park, rifle range, showground or sporting complex and the feature has no name. In this field, type in lower case either of the following: aquatic centre golf course park rifle range showground sporting complex If the feature type is a racecourse, used for the racing of horses and the feature has no name. In this field, type in lower case the following: racecourse If the feature type is a racecourse used for racing other than by horses and the feature has no name. In this field, type in lower case either of the following: bmx motorsport If the feature type is a caravan park. The feature is classified as “Other Recreational Area” in the feature type field and no name is recorded in the name field. In this field, type in lower case the following: caravan park If the feature type is a dog park. The feature is classified as “Other Recreational Area” in the feature type field and no name is recorded in the name field. In this field, type in lower case the following: dog park
ADD_INFORMATION	Yes	Text	255	A comment field (additional information)

...

Expand

title	Attribute Schema:

Sports Fields
A polygon feature class displaying the extent of sports fields on which sporting activities occur, within a park, an education facility, or other recreational area.
Column Name	Nulls	Format	Size	Description	Constraints
FEATURE_TYPE	No	Text	50	Unique feature type that identifies the type of feature. Options: Court Oval Racetrack Area Rodeo Skateboard Park Velodrome Other Sports Field	dm_sports_field
FUNCTION	Yes	Text	30	Indicates the function of the feature. Options: Court Basketball Cricket Net Croquet Lawn Bowls Multi-purpose Court Netball Tennis Oval Athletics Baseball Cricket Cricket - Football Equestrian Football Hockey Softball Sports Field Racetrack Area Athletics BMX Dog Horse Motorsport Rodeo Horse - Cattle Skateboard Skateboard Velodrome Bicycle	dm_sports_field_ function
NAME	Yes	Text	100	The name of the feature (if available)
ATTRIBUTE_SOURCE	No	Text	100	If the feature is named, the attribute_source is the source imagery, map, or data from which the features name has been obtained. If the feature is not named, the attribute_source is the source imagery, map, or data used to define what the feature type is.
ATTRIBUTE_DATE	No	Date		Date of the source imagery, map, or data used for attributing the feature.
ADDITIONAL_NAMES	Yes	Text	100	The feature may be commonly known by other names or have different spelling. Multiple additional names can be shown and separated by a comma.
ADD_NAMES_SOURCE	Yes	Text	100	The source map or data that the additional names were obtained. Multiple sources can be shown, separated by a comma. If multiple sources are shown, the written sequence will be the same as the written sequence of the names themselves.
FEATURE_SOURCE	No	Text	100	The source imagery, map, or data that the spatial location and shape of the of the feature was obtained from.
FEATURE_DATE	No	Date		Date of the source imagery, map, or data that the spatial location and shape of the feature was obtained from.
PFI	No	Text	15	A Persistent Feature Identifier (PFI) is generated for each feature at the point of creation in the database. The value of the PFI will stay with the feature through all changes to the feature (both spatial and non-spatial) until the feature is retired. (See Persistent and Unique Feature Identifiers)
UFI	No	Text	15	A Unique Feature Identifier (UFI) is generated for each new feature at the point of creation in the database (at this point the PFI and UFI will be the same). The value of the UFI will stay with the feature through all changes to the feature (both spatial and non-spatial) unless the feature is split into multiple other parts. If the feature is split, the separate parts will retain the original PFI but new UFI’s will be generated for the split parts. (See Persistent and Unique Feature Identifiers)
CREATED_DATE*	No	Date		The date the feature was originally captured and first loaded to the database *internal use only
LAST_EDITED_DATE*	Yes	Date		Date of the last editing or revision to the feature *internal use only
DIMENSION_M2	No	Double		The area of the feature measured in square metres GDA2020
UPPER_SCALE	No	Long		The upper scale for which the feature should be considered suitable for digital display.	dm_upper_scale
TEXT_NOTE	Yes	Text	50	For mapping purposes. Additional annotation that can be shown on a map. If the feature has no name. In this field, type in lower case the function type: e.g., football If the feature is classified as “Other Sports Field” in the feature type field and the feature has no name. In this field, type in lower case the following: sports field If the feature has a function of “Multi-purpose Court”, in this field, type in lower case the following: multi-purpose court or If the type of sport can be determined but not included in function type e.g., beach volleyball If the feature has a function of “Rodeo” and has no name, in this field, type in lower case the following: rodeo
ADD_INFORMATION	Yes	Text	255	A comment field (additional information)

...

Expand

title	Attribute Schema:

Sports Tracks
A polyline feature class displaying the location of narrow tracks (less than 20 metres in width) on which races or training occurs.
Column Name	Nulls	Format	Size	Description	Constraints
FEATURE_TYPE	No	Text	50	Unique feature type that identifies the type of feature. Options: Racetrack Training track	dm_sports_track
FUNCTION	Yes	Text	30	Indicates the function of the feature. Options: Athletics Bicycle BMX Horse Motorsport Other Sport	dm_sports_track_ function
NAME	Yes	Text	100	The name of the feature (if available)
ATTRIBUTE_SOURCE	No	Text	100	If the feature is named, the attribute_source is the source imagery, map, or data from which the features name has been obtained. If the feature is not named, the attribute_source is the source imagery, map, or data used to define what the feature type is.
ATTRIBUTE_DATE	No	Date		Date of the source imagery, map, or data used for attributing the feature.
ADDITIONAL_NAMES	Yes	Text	100	The feature may be commonly known by other names or have different spelling. Multiple additional names can be shown and separated by a comma.
ADD_NAMES_SOURCE	Yes	Text	100	The source map or data that the additional names were obtained. Multiple sources can be shown, separated by a comma. If multiple sources are shown, the written sequence will be the same as the written sequence of the names themselves.
FEATURE_SOURCE	No	Text	100	The source imagery, map, or data that the spatial location and shape of the of the feature was obtained from.
FEATURE_DATE	No	Date		Date of the source imagery, map, or data that the spatial location and shape of the feature was obtained from.
PFI	No	Text	15	A Persistent Feature Identifier (PFI) is generated for each feature at the point of creation in the database. The value of the PFI will stay with the feature through all changes to the feature (both spatial and non-spatial) until the feature is retired. (See Persistent and Unique Feature Identifiers)
UFI	No	Text	15	A Unique Feature Identifier (UFI) is generated for each new feature at the point of creation in the database (at this point the PFI and UFI will be the same). The value of the UFI will stay with the feature through all changes to the feature (both spatial and non-spatial) unless the feature is split into multiple other parts. If the feature is split, the separate parts will retain the original PFI but new UFI’s will be generated for the split parts. (See Persistent and Unique Feature Identifiers)
CREATED_DATE*	No	Date		The date the feature was originally captured and first loaded to the database *internal use only
LAST_EDITED_DATE*	No	Date		Date of the last editing or revision to the feature *internal use only
DIMENSION_M	No	Double		The length of the feature measured in metres GDA2020
UPPER_SCALE	No	Long		The upper scale for which the feature should be considered suitable for digital display	dm_upper_scale
TEXT_NOTE	Yes	Text	50	For mapping purposes. Additional annotation that can be shown on a map. If the feature has no name. In this field, type in lower case the function type: e.g., motorsport If the feature has no name and is classified with a function of “Bicycle” In this field, type in lower case the following: velodrome If the feature has no name and is classified as a feature type of “Training Track”. In this field, type in lower case the following: training track
ADD_INFORMATION	Yes	Text	255	A comment field (additional information)

...

Expand

title	Attribute Schema:

Storage Tanks
A polygon feature class displaying the location of large vessels used for the storage of oil, gas, or other industrial liquids. (not water)
Column Name	Nulls	Format	Size	Description	Constraints
FEATURE_TYPE	No	Text	50	Unique feature type that identifies the type of feature. Options: Storage Tank
NAME	No	Text	100	The name of the feature (if available)
ATTRIBUTE_SOURCE	No	Text	100	If the feature is named, the attribute_source is the source imagery, map, or data from which the features name has been obtained. If the feature is not named, the attribute_source is the source imagery, map, or data used to define what the feature type is.
ATTRIBUTE_DATE	No	Date		Date of the source map, or data where the name of the feature was obtained.
ADDITIONAL_NAMES	Yes	Text	100	The feature may be commonly known by other names or have different spelling. Multiple additional names can be shown and separated by a comma.
ADD_NAMES_SOURCE	Yes	Text	100	The source map or data that the additional names were obtained. Multiple sources can be shown, separated by a comma. If multiple sources are shown, the written sequence will be the same as the written sequence of the names themselves.
FEATURE_SOURCE	No	Text	100	The source imagery, map, or data that the spatial location and shape of the of the feature was obtained from.
FEATURE_DATE	No	Date		Date of the source imagery, map, or data that the spatial location and shape of the feature was obtained from.
PFI	No	Text	15	A Persistent Feature Identifier (PFI) is generated for each feature at the point of creation in the database. The value of the PFI will stay with the feature through all changes to the feature (both spatial and non-spatial) until the feature is retired. (See Persistent and Unique Feature Identifiers)
UFI	No	Text	15	A Unique Feature Identifier (UFI) is generated for each new feature at the point of creation in the database (at this point the PFI and UFI will be the same). The value of the UFI will stay with the feature through all changes to the feature (both spatial and non-spatial) unless the feature is split into multiple other parts. If the feature is split, the separate parts will retain the original PFI but new UFI’s will be generated for the split parts. (See Persistent and Unique Feature Identifiers)
CREATED_DATE*	No	Date		The date the feature was originally captured and first loaded to the database *internal use only
LAST_EDITED_DATE*	No	Date		Date of the last editing or revision to the feature *internal use only
DIMENSION_M2	No	Double		The area of the feature measured in square metres GDA2020
UPPER_SCALE	No	Long		The upper scale for which the feature should be considered suitable for digital display.	dm_upper_scale
TEXT_NOTE	Yes	Text	50	For mapping purposes. Additional annotation that can be shown on a map. If the feature has no name. In this field, type in lower case either: gas tank oil tank storage tank (for other liquid or unknown) Multiple tanks close together can be merged into a single multi-polygon with the label being the plural e.g., oil tanks, multiple oil tanks
ADD_INFORMATION	Yes	Text	255	A comment field (additional information)

...

Expand

title	Attribute Schema:

Swimming Pools
A polygon feature class displaying the extent of constructed facilities where the public can swim.
Column Name	Nulls	Format	Size	Description	Constraints
FEATURE_TYPE	No	Text	50	Unique feature type that identifies the type of feature. Options: Swimming Enclosure Swimming Pool	dm_swimming_ pool
NAME	No	Text	100	The name of the feature (if available)
ATTRIBUTE_SOURCE	No	Text	100	If the feature is named, the attribute_source is the source imagery, map, or data from which the features name has been obtained. If the feature is not named, the attribute_source is the source imagery, map, or data used to define what the feature type is.
ATTRIBUTE_DATE	No	Date		Date of the source imagery, map, or data used for attributing the feature.
ADDITIONAL_NAMES	Yes	Text	100	The feature may be commonly known by other names or have different spelling. Multiple additional names can be shown and separated by a comma.
ADD_NAMES_SOURCE	Yes	Text	100	The source map or data that the additional names were obtained. Multiple sources can be shown, separated by a comma. If multiple sources are shown, the written sequence will be the same as the written sequence of the names themselves.
FEATURE_SOURCE	No	Text	100	The source imagery, map, or data that the spatial location and shape of the of the feature was obtained from.
FEATURE_DATE	No	Date		Date of the source imagery, map, or data that the spatial location and shape of the feature was obtained from.
PFI	No	Text	15	A Persistent Feature Identifier (PFI) is generated for each feature at the point of creation in the database. The value of the PFI will stay with the feature through all changes to the feature (both spatial and non-spatial) until the feature is retired. (See Persistent and Unique Feature Identifiers)
UFI	No	Text	15	A Unique Feature Identifier (UFI) is generated for each new feature at the point of creation in the database (at this point the PFI and UFI will be the same). The value of the UFI will stay with the feature through all changes to the feature (both spatial and non-spatial) unless the feature is split into multiple other parts. If the feature is split, the separate parts will retain the original PFI but new UFI’s will be generated for the split parts. (See Persistent and Unique Feature Identifiers)
CREATED_DATE*	No	Date		The date the feature was originally captured and first loaded to the database *internal use only
LAST_EDITED_DATE*	No	Date		Date of the last editing or revision to the feature *internal use only
DIMENSION_M2	No	Double		The area of the feature measured in square metres GDA2020
UPPER_SCALE	No	Long		The upper scale for which the feature should be considered suitable for digital display	dm_upper_scale
TEXT_NOTE	Yes	Text	50	For mapping purposes. Additional annotation that can be shown on a map. If the feature is a swimming enclosure and has no name. In this field, type in lower case the following: swimming enclosure
ADD_INFORMATION	Yes	Text	255	A comment field (additional information)

...

Expand

title	Attribute Schema:

Tourist Points
A point feature class displaying the location of a collection of features that would be of interest to tourists.
Column Name	Nulls	Format	Size	Description	Constraints
FEATURE_TYPE	No	Text	50	Unique feature type that identifies the type of feature. Options: Camping Ground Historic Building Historic Site Historic Tree Lookout Tourist Attraction Tourist Information Centre Wreck Other Tourist Point	dm_tourist_point
NAME	Yes	Text	100	The name of the feature (if available)
ALTERNATE_NAME	Yes	Text	100	An alternate name of the feature if available from the Queensland Place Names Database, otherwise left blank
QLD_PNDB_ID	Yes	Long		Queensland Place Names Database unique identifier
ATTRIBUTE_SOURCE	No	Text	100	If the feature is named, the attribute_source is the source imagery, map, or data from which the features name has been obtained. If the feature is not named, the attribute_source is the source imagery, map, or data used to define what the feature type is.
ATTRIBUTE_DATE	No	Date		Date of the source imagery, map, or data used for attributing the feature.
ADDITIONAL_NAMES	Yes	Text	100	The feature may be commonly known by other names or have different spelling. Multiple additional names can be shown and separated by a comma.
ADD_NAMES_SOURCE	No	Text	100	The source map or data that the additional names were obtained. Multiple sources can be shown, separated by a comma. If multiple sources are shown, the written sequence will be the same as the written sequence of the names themselves.
FEATURE_SOURCE	No	Text	100	The source imagery, map, or data that the spatial location of the feature was obtained from.
FEATURE_DATE	No	Date		Date of the feature source information that the location of the feature was obtained from.
PFI	No	Text	15	A Persistent Feature Identifier (PFI) is generated for each feature at the point of creation in the database. The value of the PFI will stay with the feature through all changes to the feature (both spatial and non-spatial) until the feature is retired. (See Persistent and Unique Feature Identifiers)
UFI	No	Text	15	A Unique Feature Identifier (UFI) is generated for each new feature at the point of creation in the database (at this point the PFI and UFI will be the same). The value of the UFI will stay with the feature through all changes to the feature (both spatial and non-spatial) unless the feature is split into multiple other parts. If the feature is split, the separate parts will retain the original PFI but new UFI’s will be generated for the split parts. (See Persistent and Unique Feature Identifiers)
CREATED_DATE*	No	Date		The date the feature was originally captured and first loaded to the database *internal use only
LAST_EDITED_DATE	No	Date		Date of the last editing or revision to the feature *internal use only
UPPER_SCALE	No	Long		The upper scale for which the feature should be considered suitable for digital display	dm_upper_scale
TEXT_NOTE	Yes	Text	50	For mapping purposes. Additional annotation that can be shown on a map. If the feature has no name. In this field, type in lower case the type of feature: e.g., lookout
ADD_INFORMATION	Yes	Text	255	A comment field (additional information)

...

Expand

title	Attribute Schema:

Water Storage Structures
A polygon feature class displaying the extent of water storage structures either at surface level or elevated above ground.
Column Name	Nulls	Format	Size	Description	Constraints
FEATURE_TYPE	No	Text	50	Unique feature type that identifies the type of feature. Options: Water Tank Water Tower	dm_waterstorage
NAME	No	Text	100	The name of the feature (if available)
ATTRIBUTE_SOURCE	No	Text	100	If the feature is named, the attribute_source is the source imagery, map, or data from which the features name has been obtained. If the feature is not named, the attribute_source is the source imagery, map, or data used to define what the feature type is.
ATTRIBUTE_DATE	No	Date		Date of the source imagery, map, or data used for attributing the feature.
ADDITIONAL_NAMES	Yes	Text	100	The feature may be commonly known by other names or have different spelling. Multiple additional names can be shown and separated by a comma.
ADD_NAMES_SOURCE	Yes	Text	100	The source map or data that the additional names were obtained. Multiple sources can be shown, separated by a comma. If multiple sources are shown, the written sequence will be the same as the written sequence of the names themselves.
FEATURE_SOURCE	No	Text	100	The source imagery, map, or data that the spatial location and shape of the of the feature was obtained from.
FEATURE_DATE	No	Date		Date of the source imagery, map, or data that the spatial location and shape of the feature was obtained from.
RELATIONSHIP	No	Text	12	Relationship to ground level. Options: Elevated Surface Sub-surface	dm_waterstorage_ relationship
PFI	No	Text	15	A Persistent Feature Identifier (PFI) is generated for each feature at the point of creation in the database. The value of the PFI will stay with the feature through all changes to the feature (both spatial and non-spatial) until the feature is retired. (See Persistent and Unique Feature Identifiers)
UFI	No	Text	15	A Unique Feature Identifier (UFI) is generated for each new feature at the point of creation in the database (at this point the PFI and UFI will be the same). The value of the UFI will stay with the feature through all changes to the feature (both spatial and non-spatial) unless the feature is split into multiple other parts. If the feature is split, the separate parts will retain the original PFI but new UFI’s will be generated for the split parts. (See Persistent and Unique Feature Identifiers)
CREATED_DATE*	No	Date		The date the feature was originally captured and first loaded to the database *internal use only
LAST_EDITED_DATE*	No	Date		Date of the last editing or revision to the feature *internal use only
DIMENSION_M2	No	Double		The area of the feature measured in square metres GDA2020
UPPER_SCALE	No	Long		The upper scale for which the feature should be considered suitable for digital display.	dm_upper_scale
TEXT_NOTE	Yes	Text	50	For mapping purposes. Additional annotation that can be shown on a map. If the feature has no name. In this field, type in lower case either: water tank (if constructed on the surface or sub-surface) water tower (if constructed on top of a tower)
ADD_INFORMATION	Yes	Text	255	A comment field (additional information)

...

Version	Old Version 46	New Version 47
Changes made by	Cathie Campbell	Cathie Campbell
Saved on	21, Oct, 2024	21, Oct, 2024

Versions Compared

Key